| |
Product Name- |
Price |
 |
Aluminum Car Set of Two (one pair), enough for both sides of one cockpit heel plate. Comes with three threaded holes in each car and two sets of six... |
$150.00
... more info
|
 |
Replacement Bungee Cord is the same elastic cord that is used on all HUKI boats and other similar watercraft. Best application of cord is for the... |
... more info
|
 |
Crimp on cable ball-stop to fit HUKI Ø1/16 rudder cable. Made of stainless steel for corrosion resistance. Priced per piece. You can find whole... |
$2.75
... more info
|
 |
Replacement Carbon Fiber Seat Car for Huki Slide Track Seats. Seat Car fits all Huki Single & Double Outrigger Canoes as well as Dragonboats. |
$120.00
... more info
|
 |
3/16 inch diameter clevis pin 1/4 inch long, and ring clip, one of each. Fits HUKI Surfskis and Huki Outrigger Canoes at cable eye-ends for rudder... |
$8.00
... more info
|
 |
Eye End - swage (crimp) fitting for 1/16 inch cable. Aerospace Grade Stainless Steel. This is the eye ends that are used on all Huki steering... |
$17.00
... more info
|
 |
Replacement rod for factory installed slide track seats. Rod is used on all HUKI Single and Double Outrigger Canoes along with Dragonboats. For... |
$7.00
... more info
|
 |
Comes fully assembled and ready to placed onto your original slide tracks. Fits all current production Huki Surfskis from 2012 onward except for... |
$480.00
... more info
|
 |
Comes fully assembled and ready to placed onto your original slide tracks. Fits the current production S1-R with small cockpit, and fits all Huki... |
$480.00
... more info
|
 |
HUKI rudder shaft fits any HUKI yoke (T-bar) with a hex receptacle. Made of marine stainless steel for corrosion resistance and superior strength.... |
$65.00
... more info
|
 |
Iako Set to fit Kaku Elua OC-1. This iako set is made by Huki to fit the Kaku. It is not an original Kaku part. It rigs to the original Kaku ama. The... |
$525.00
... more info
|
 |
HUKI rudder shaft specifically designed to fit almost all Outrigger Canoes, kayaks, surfskis and SUP that have a quarter inch square hole in the yoke... |
$65.00
... more info
|
 |
Universal HUKI rudder shaft fits any yoke (T-bar) with a square hole of almost any size. Includes manufacturers, such as: Kaku, Kamanu Composites,... |
$65.00
... more info
|
 |
Yoke or T-bar to fit all Huki paddle craft. This ornate whale tail shaped yoke has been used on all Huki paddle craft since the turn of the century.... |
$35.00
... more info
|
 |
Bungee Loop Anchors come in two styles: |
$5.00
... more info
|
 |
Bungee Loop Anchors, Screw style: Used on our older boat models. The Screw style Bungee Loop mounts very strongly, but requires drilling and sealing... |
$2.00
... more info
|
 |
Surf Ski Foot Strap by HUKI Keeps your feet in the boat and keeps you out of the water...When your surfski starts to roll or flood you out, hook the... |
$45.00
... more info
|
 |
Surf Ski Foot Straps by HUKI Keeps your feet in the boat and you out of the water. Foot straps fit universally on all HUKI Surf Skis with double... |
$35.00
... more info
|
 |
Replacement knob for all HUKI rudder shafts that fit Huki Outrigger Canoes and Surfskis. Three soft lobes, Threaded 1/4-20 UNC (Ø 1/4" Coarse... |
$5.00
... more info
|
 |
Replacement knob for early model HUKI SurfSkis with adjustable double foot wells. The older style that used two separate slotted aluminum sliding... |
$5.00
... more info
|
 |
The five lobe knob has 3/8 inch coarse threads in a blind hole. These are found on Huki stubby iako sets on our whole variety of OC-1 and OC-2. These... |
$9.00
... more info
|
 |
Replacement knob for the HUKI V2-A outrigger Canoe. Threaded 1/2-13 UNC (Ø 1/2" Coarse Thread). This knob also fits many of the older style OC-2 by... |
$9.00
... more info
|
 |
Upgrade your canoe for more comfort. Universal foam tractor seats are available to fit all OC-1's and other canoes. These seats can be fastened down... |
$169.00
... more info
|
 |
Upgrade your Kaku seat with HUKI performance. We designed a super comfortable seat for a perfect fit in the old Kaku Kaimana cockpit. Fits great and... |
$199.00
... more info
|
 |
This seat is made at Huki to fit the Kaku Elua. Way more comfortable than the original seat and fits the cockpit better too. It is an aftermarket... |
$199.00
... more info
|
 |
Stainless spring detent, 3/8" diameter, to fit iako tubes on HUKI canoes. This button size was often used on Kaku canoes and John Martin canoes. Made... |
$5.00
... more info
|
 |
Stainless spring detent, 5/16" diameter button, to fit iako tubes on canoes from some other manufacturers. This button was used an a large variety of... |
$5.00
... more info
|
 |
Drain Plug with Snorkel - Replacement drain plug with built in air duct that allows air to expand out of the hull or to contract into the hull to... |
$11.00
... more info
|
 |
Kelp guard (tiny skeg in front of rudder). This helps to prevent grass from catching between the rudder blade and the bottom of the hull. It's really... |
$35.00
... more info
|
 |
Replacement Venturi's for vacuumed assisted footwells - Comes in full sets of enough pieces to update two drain holes...The front piece is called the... |
$129.00
... more info
|
